STC Gear Sell Unity Audio Rock and Boulder Monitors and Fairlight Consoles and Workstations


THE BABE Boulder Active Bass Extender

Bass - how low can you go?

The BABE - Extended LF response and SPL performance. The B.A.B.E. transforms the 3-way Boulder monitor into a true 4-way monitoring system. With flexible soffit mount or free-standing installation options, the system can be mounted horizontally or vertically and an optional free-standing plinth/spacer is available.

The B.A.B.E. adds a flexible modular approach enabling a fully 4-way system configured the way you want it, with breathtaking performance. The 4-way system extends SPL and low end frequency response. The driver is forward facing as there is significant reproduction of LF phase coherent audio giving  great directional definition. The sealed cabinet design is internally isolated to reduce vibration interference and uses a single 300mm driver with a 125mm voice coil, designed exclusively for low frequency reproduction.

The System The system comprises two bass extension cabinets with their own rack mountable 750 watt class D amplifiers and speaker-management. All housed in separate rack mountable units that control the audio routing, gain, cross-over management, optional EQ and Limiting.

BB-DSP Processor With 4 balanced analogue inputs and 8 outputs with full matrix mixing capabilities, the Unity Audio BB-DSP gives the flexibility you need to control 2x B.A.B.E cabinets and Boulders, or even 4x B.A.B.E's and Boulders for larger studio systems, or a L,C,R B.A.B.E/ Boulder for surround configurations. If needed compressors are available on every input as well as a high pass filter, 6 bands of parametric EQ and up to 1.3 seconds of delay as well as a new limiter designed to offer the best driver protection with the lowest possible distortion.

The BB-DSP comes with a factory configured preset with the correct 167Hz Linkwitz Riley 24 dB per octave crossover point, ganged outputs 1 & 2 feed the B.A.B.Es, with ganged outputs 3 & 4 feeding the Boulders. A second preset is also provided effectively acting as a B.A.B.E bypass if it is needed to use the Boulders by themselves with their full frequency response. The BB-DSP runs at 96kHz as standard but can be switched into 48kHz mode to take advantage of 48dB/Oct output crossover filters and two bands of dynamic EQ on both input and output channels if needed.
Ethernet based PC control software gives you the ability to not only control all the devices on a network but also to store preset memories and configure systems offline.

Drivers The B.A.B.E. uses an innovative 300mm woofer designed exclusively for sub and low frequencies. The driver employs a huge 130mm Hexatech external voice coil wound with a hexagonal-shaped aluminum coil wire (2-3 times thicker than standard woofers) for accurate music reproduction, superior durability and power handling. This driver delivers an extraordinary combination of audiophile musicality and high power handling.

Sealed cabinet The B.A.B.E. retains the same sealed cabinet approach used throughout the Unity Audio range. This design approach provides faster, tighter and more accurate linear bass reproduction and results in less phase rotation, reduced time domain ringing, lower group delay and a shallower roll-off slope than inferior ported designs. These characteristics make The B.A.B.E. a natural choice for all critical music applications.


Applications. The B.A.B.E. is suitable for all recording and mastering facilities and has been carefully designed to suit all environments and applications. As the system is flexible and modular, it can be used free standing or soffit mounted in either horizontal or vertical configurations without compromising performance.




Brattleboro,VT 05301


Monday to Friday 9-5 EST
Sat & Sun - Service plan members only


2016 STC Gear, All Rights Reserved.